This Cisco Aironet 1602 Access Point needs AP controller, supports internal antenna and follows 802.11a/g/n protocol. Its regulatory domain is A which means FCC area, including North, South, and Central America, Australia, and New Zealand, various parts of Asia and Oceania.
Type | 802.11a/g/n Ctrlr-based AP, Integrated Antenna, A Reg Domain, AP controller needed |
Software | Cisco Unified Wireless Network Software (available in Q4CY12) Cisco IOS® Software Release(available in Q4CY12) |
802.11n | 3 x 3 multiple-input multiple-output (MIMO) with two spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 300 Mbps Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) (Bin 5) Cyclic shift diversity (CSD) support |
Frequency Band and 20-MHz Operating Channels | A Regulatory Domain: 2.412 to 2.462 GHz; 11 channels 5.180 to 5.320 GHz; 8 channels 5.500 to 5.700 GHz; 8 channels (excludes 5.600 to 5.640 GHz) 5.745 to 5.825 GHz; 5 channels |
Integrated Antenna | 2.4 GHz, gain 4.0 dBi, horizontal beamwidth 360° 5 GHz, gain 4.0 dBi, horizontal beamwidth 360° |
External Antenna (Sold Separately) | Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) Cisco offers the industry’s broadest selection of 802.11n antennas delivering optimal coverage for a variety of deployment scenarios |
Interfaces | 10/100/1000BASE-T autosensing (RJ-45) Management console port (RJ-45) |
Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
Dimensions (W x L x H) |
Access point (without mounting bracket): 8.7 x 8.7 x 1.84 in. (22.1 x 22.1 x 4.7 cm) |
Weight | 1.9 lbs. (0.86 kg) |
Environmental | Cisco Aironet 1600i Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C) Nonoperating (storage) Altitude Test -25°C, 15,000 ft. Operating temperature: 32 to 104°F (0 to 40°C) Operating humidity: 10 to 90% percent (noncondensing) Operating Altitude Test -40°C, 9843 ft. |